Detection of Water or Gas Entries in Horizontal Wells From Temperature Profiles

Keita Yoshioka, Ding Zhu, A. Hill, Pinan Dawkrajai, Larry W. Lake

Proceedings of SPE EUROPEC/EAGE Annual Conference and Exhibition · 2006 · 15 citations · 0 references

Concepts

Abstract

Detection of Water or Gas Entries in Horizontal Wells from Temperature Profiles Keita Yoshioka; Keita Yoshioka Search for other works by this author on: This Site Google Scholar Ding Zhu; Ding Zhu Texas A&M University Search for other works by this author on: This Site Google Scholar A.D. Hill; A.D. Hill U. of Texas Austin Search for other works by this author on: This Site Google Scholar Pinan Dawkrajai; Pinan Dawkrajai Search for other works by this author on: This Site Google Scholar Larry Wayne Lake Larry Wayne Lake U. of Texas Austin Search for other works by this author on: This Site Google Scholar Paper presented at the SPE Europec/EAGE Annual Conference and Exhibition, Vienna, Austria, June 2006. Paper Number: SPE-100209-MS https://doi.org/10.2118/100209-MS Published: June 12 2006 Cite View This Citation Add to Citation Manager Share Icon Share Twitter LinkedIn Get Permissions Search Site Citation Yoshioka, Keita, Zhu, Ding, Hill, A.D., Dawkrajai, Pinan, and Larry Wayne Lake. "Detection of Water or Gas Entries in Horizontal Wells from Temperature Profiles." Paper presented at the SPE Europec/EAGE Annual Conference and Exhibition, Vienna, Austria, June 2006. doi: https://doi.org/10.2118/100209-MS Download citation file: Ris (Zotero) Reference Manager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex Search Dropdown Menu nav search search input Search input auto suggest search filter All ContentAll ProceedingsSociety of Petroleum Engineers (SPE)SPE Europec featured at EAGE Conference and Exhibition Search Advanced Search AbstractWith the recent development of temperature measurement systems such as fiber optic distributed temperature sensors (DTS), continuous temperature profiles in a horizontal well can be obtained with high precision. Small temperature changes with a resolution on the order of 0.1 °F can be detected by modern temperature-measuring instruments in intelligent completions and may aid the diagnosis of downhole flow conditions. Since in a producing horizontal well, fluid inflowing temperature is not affected by elevational geothermal temperature changes, the primary temperature differences for each phase (oil, water, and gas) are caused by frictional effects.While gas production usually causes a temperature decrease, water entry results in either warming or cooling of the wellbore. Warmer water entry is a result of water flow from a warmer aquifer below the producing zone (water coning). In contrast, produced water can be cooler than produced oil because of differences in the thermal properties of these fluids. If both oil and water are produced from the same elevation, oil is heated more by friction while flowing in a porous medium than water, resulting in the produced water having a lower inflow temperature than the oil. Water entry by coning is relatively easy to detect from the temperature profile because of its warmer inflow temperature, but water breakthrough from the same elevation as the oil may not be obvious.In this paper, we illustrate the range of inflow conditions for which water or gas entry locations can be identified from the temperature profile of a well from measurable temperature changes. Using a temperature prediction model,[1] we calculated temperature profiles for a wide range of water inflow conditions. In these calculations we assumed that one section of the well was producing water or gas, while the rest of the open section of the well produced oil. From sensitivity studies, we identified the relative water and gas production rates that create detectable temperature anomalies in the temperature profile along the well.IntroductionTemperature logs have been used to locate water entries. Some field examples[2,3] reported the successful identification of water entry and prevention of its further production. However, the identification is commonly made by intuition, that is, gas entries reduce the wellbore temperature, and water entries increase the temperature. The inferences are also qualitative: there is no means to determine the rate of water entry, for example. To optimize well performance, we need a better method to identify water or gas entries.We will analyze anomalous temperature changes along a flowing horizontal well using a temperature model for horizontal wells. The main difference of the model from the vertical thermal wellbore models[4,5] is that the geothermal temperature is constant along a horizontal well. Temperature deviations from the geothermal temperature are caused by changes in flow conditions in the reservoir and wellbore. If we assume that all the fluids in the wellbore are produced from the same elevation (i.e. the temperatures are same at the boundary), the reservoir energy balance can be solved as a 1-D problem. To infer temperature behavior of the water coning, the problem needs to be solved in 3D.[6] This work is an extension of a simple thermal model developed previously[1] that considers steady-state single phase flow in reservoir segments and multi-phase flow in the wellbore.Model DescriptionWe have used two different models in this study. For water coning, a 3D reservoir model is used (Fig. 1). The top and sides of the rectangular reservoir are sealed, and the pressure below the reservoir (aquifer's pressure) is constant. For water produced from the same elevations as the oil, a 1D reservoir model is used (Fig. 2). We consider a steady state reservoir with constant fluxes from both sides and no flow at other boundaries. In both cases, we assumed fully penetrating horizontal wellbores.For non-isothermal, we can derive the mass and energy balance equations for the reservoir and wellbore. The solution of the coupled reservoir and wellbore equations provide us the temperature and pressure profiles in the domain of interest. Keywords: production monitoring, enhanced recovery, Reservoir Surveillance, Temperature difference contour, Upstream Oil & Gas, temperature change, production control, production logging, flow rate, horizontal well Subjects: Well & Reservoir Surveillance and Monitoring, Improved and Enhanced Recovery, Production logging This content is only available via PDF. 2006. Society of Petroleum Engineers You can access this article if you purchase or spend a download.