Journal of Intelligent Material Systems and Structures · 2000 · 54 citations · 0 references
EngineeringAutomotive EngineeringMechanical EngineeringMechanical DesignStructural DynamicsVibrationDamped VibrationForced VibrationStructural DampingStructural VibrationVehicle VibrationVibration ControlActive Damping ControlDamper DynamicsLateral Vibration ControlSeat Suspension DynamicsSeat VibrationSeat-to-body VibrationVibration Management
The study introduces a semi‑active seat suspension using a magneto‑rheological fluid damper designed for commercial trucks to control vibration. A cylindrical MR damper based on the Bingham model is fabricated, its field‑dependent damping characteristics measured, and a skyhook controller is implemented in a closed‑loop system whose governing equations and control responses are analyzed in both frequency and time domains, with a full‑vehicle model validated through hardware‑in‑the‑loop simulation. Hardware‑in‑the‑loop simulation confirms that the proposed semi‑active seat suspension effectively reduces driver‑seat vibration.
This paper presents vibration control of a semi-active seat suspension with a magneto-rheological (MR) fluid damper, which is applicable to commercial vehicles such as large size of trucks. A cylindrical MR seat damper is designed on the basis of the Bingham model of the MR fluid. After manufacturing the seat damper, field-dependent damping force characteristics are experimentally evaluated. A semi-active seat suspension system installed with the seat damper is then constructed and its governing equation of motion is derived. A skyhook controller to reduce vibration level at the driver’s seat is formulated and realized in a closed-loop control fashion. The control responses, such as acceleration transmissibility, are investigated in both frequency and time domains. In addition, a full-vehicle model featuring the proposed semi-active seat suspension is established and its vibration control performances are evaluated via the hardware-in-the-loop simulation (HILS).