2000 · 25 citations · 0 references
EngineeringPetroleum EngineeringFormation EvaluationHydraulic FracturingReservoir EngineeringFormation TestingFracture CharacterizationGas Well TestingPressure Transient AnalysisWell HydraulicsWell Performance AnalysisBuildup Pressure TestingEffective Permeability EstimationFracture LengthFractured ReservoirsFracturesHydraulic Fracture CharacterizationLow-permeability ReservoirsPressure Buildup Testing
The ability to determine the effective half-length and conductivity of hydraulic fractures is important for estimating a well's long-term production performance. The determination of these properties, along with the formation effective permeability, can result in more accurate predictions of the ultimate hydrocarbon recovery. In very low permeability reservoirs, fracture half-length is the key to optimum reservoir development. Being able to quantify these properties also allows for improved understanding of the effects of treatment design changes. Post-treatment pressure buildup testing has been the most common method for determining the effective length of hydraulic fractures. One of the major drawbacks of the pressure transient test in very low permeability reservoirs is the extremely long shut-in time required to observe a sufficient amount of the fractured well transient behavior to properly characterize the formation and fracture properties. This long shut-in time is undesirable due to the fact that the well is not able to produce and generate revenue during this time.This paper reports on the most recent results of an ongoing study of the production performance of hydraulically fractured wells. The focus of the study is a comparison of the performance of conventionally fractured wells and those that have been completed with the treated water and low proppant concentration (