Coatings · 2022 · 18 citations · 34 references
Natural SciencesMaterials EngineeringMaterials ScienceInterface ScienceSurface ScienceThin FilmsCoatingsSurface CoatingsSurface PhysicsThin Film Electrical PropertiesThin-film DepositionThin-film MaterialsBipolar PlatesCrystal Preferred OrientationCrystallographic Preferred OrientationInterfacial ResistanceMagnetron SputteringPreferred OrientationSputteringSurface Conductivity
The properties of thin films are often influenced by the crystal’s preferred orientation. In the present study, we report the strong dependence of surface conductivity on the preferred orientation of TiN film that acts as the coating material for Ti bipolar plate. The preferred orientation of TiN film is successfully controlled along the (111) or (200) planes by adjusting the N2 flow rate or Ti substrate temperature during the deposition process via DC (direct current) reactive magnetron sputtering. Small N2 flow rate of 3 to 6 sccm or low substrate temperature (e.g., 25 °C) facilitates the growth of TiN films along the (111). The (111) preferred orientated TiN films show much lower interfacial contact resistance (ICR) than the (200) preferred orientated films. A considerably low ICR value of 1.9 mΩ·cm2 at 140 N/cm2 is achieved at the N2 flow of 4 sccm and the substrate temperature of 25 °C.
34
Yuko Nakamori, Kazutoshi Miwa, A. Ninomiya et al. · Physical Review B · 2006 · 510 citations · Full text
Mohammed A. Amin, K.F. Khaled, Sahar A. Fadlallah · Corrosion Science · 2009 · 327 citations
Natural Sciences, Materials Engineering, Materials Science +16