European Journal of Materials · 2022 · 24 citations · 40 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer Materials3D PrintingComposite MaterialsFabrication MaterialsPolymer Additive ManufacturingPolymer ProcessingPolymeric BiomaterialsAnisotropyAnisotropy In Printed PartsAnisotropy Of Mechanical PropertiesManufacturingMechanical AnisotropyMechanical PerformanceMechanical Property AnisotropyTricalcium Phosphate
3D printing is a manufacturing technique based on the structuring of parts layer by layer. This principle yields a specific printing direction, that is the spatial orientation of the produced layers. Thus, potential anisotropy arising from the printing direction is a major concern in 3D printing. The mechanical properties of a biocompatible resin mainly consisting of methacrylates and tricalcium phosphate particles is examined. Various tests are conducted to examine the mechanical anisotropy of testing samples manufactured with a 3D printer based on stereolithography. A digital light processing unit (λ = 375 nm) is utilized to produce test samples in three orthogonal directions. Bending behaviour, fracture toughness, and hardness are measured. Furthermore, light microscopy is utilized to assess the properties of the fractured samples qualitatively. Assessed values are in agreement with comparable materials and show no statistically significant (p = 0.095) evidence of anisotropic behaviour. Sample orientation has no impact on the mechanical properties of the produced parts. Thus, production time and capabilities can be optimized by varying and combining sample orientation without changing the mechanical performance of the engineered parts significantly.
40
Mechanical characterization of 3D-printed polymers
John Ryan C. Dizon, Alejandro H. Espera, Qiyi Chen et al. · Additive manufacturing · 2017 · 1.3K citations
Natural Sciences, Materials Engineering, Materials Science +12
Mechanical property characterization and simulation of fused deposition modeling Polycarbonate parts
Miquel Domingo-Espin, Josep Maria Puigoriol-Forcada, Andrés‐Amador García‐Granada et al. · Materials & Design · 2015 · 526 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +11