Frontiers in Materials · 2022 · 62 citations · 65 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceStructure-activity RelationshipsSurface ScienceCorrosion EngineeringCorrosion InhibitorsCorrosion Of SteelsCorrosion ProtectionCorrosion-resistant MaterialsSurfactantsCarbon Steel CorrosionCorrosion Inhibition MechanismsCorrosion Inhibitors For Carbon SteelFatty AcidsIonic SurfactantsNatural SurfactantsSteel Corrosion ResistanceSurfactant Corrosion Inhibitors
Steel alloys are significant industrial substances, but they generally suffer severe corrosion under harsh conditions. Using inhibitors is an efficacious method to impede corrosion. So, in this study, two novel natural surfactants based on soybean oil have been synthesized by a facile route, namely, 1-(bis(2-hydroxyethyl)amino)-1-oxooctadecan-9-yl sulfate 2-hydroxyethan-1-aminium (CSM) and–N-(C 2 H 4 -OH) 2 ; 1-(bis(2-hydroxyethyl)amino)-1-oxooctadecan-9-yl sulfate bis(2-hydroxyethyl)aminium (CSD), and their chemical structures were elucidated by physical–chemical approaches, Fourier transform infrared (FT-IR) spectroscopy, and surface activity measurements. The inhibitive effect of natural surfactants (CSM and CSD) on the C-steel corrosion in CO 2 -saturated 3.5% NaCl has been estimated in this investigation by electrochemical and surface analyses including electrochemical impedance spectroscopy (EIS), potentiodynamic polarization (PDP), linear polarization resistance (LPR) corrosion rate, X-ray photoelectron spectroscopy (XPS), and field-emission scanning electron microscope/energy-dispersive X-ray spectroscopy (FESEM/EDX) approaches. The EIS study reveals the value of R p augmented to an increase of 913.5 Ω cm 2 with a protection capacity of 96.1% at 150 ppm (CSD). The outcomes of PDP suggested that CSM and CSD are mixed-type inhibitors. XPS and FESEM/EDX analyses determined the protective film formation on a metal interface having undamaged surface morphology and more homogeneities in the occurrence of the surfactant. Moreover, the adsorption of natural surfactants on the metal substrate takes place based on the model of Langmuir isotherm. Density functional theory (DFT) calculations and Monte Carlo (MC) simulations were selected for attaining basic atomic/electronic-scale details about the prepared surfactants, which support the practical findings. This study is intended to investigate the protection of C-steel using sweet service conditions with green extract surfactants.
65
Fouad Bentiss, M. Lebrini, M. Lagrenée · Corrosion Science · 2005 · 1K citations
Engineering, Chemical Engineering, Materials Engineering +17
Muzaffer Özcan, İlyas Dehri, M. Erbil · Applied Surface Science · 2004 · 501 citations
Natural Sciences, Materials Engineering, Materials Science +17
Sourav Kr. Saha, Pritam Ghosh, Abhiram Hens et al. · Physica E Low-dimensional Systems and Nanostructures · 2014 · 462 citations
Natural Sciences, Materials Engineering, Materials Science +17