Surface quality parameters for structural components manufactured by DED-arc processes

Abstract

Additive manufacturing of structural metallic components is an emerging technology. The DED-arc (direct energy deposition) process combines efficiency with high degrees of freedom and predictable quality. Compared to powder-based processes, the surface is relatively coarse as a result of high heat input and larger molten zones. In industrial applications, the post-treatment of surfaces of DED-arc components cannot be guaranteed for economic reasons or due to geometric constraints. Hence, the surface topography must be evaluated and quality levels need to be defined. Unfortunately, established surface parameters and their determination cannot be directly transferred to DED-arc components and further research on this topic is needed. This article demonstrates surface topography features of representative DED-arc components. Furthermore, waviness profiles were established by applying an alternative cutoff wavelength to better represent the DED-arc surface characteristics. Based on these waviness profiles, 2-dimensional height parameters were calculated. The waviness parameters were determined for four DED-arc specimens made from high strength wire electrodes. The manufacturing parameters were varied in terms of different energy input and interpass temperature, resulting in varying deposition rates and surface qualities. The waviness parameters correlated with manufacturing parameters. A mixed deterministic and random nature of the surface topography was verified.