Three‐dimensional complex construct fabrication of illite by digital light processing‐based additive manufacturing technology

Abstract

Abstract Illite is a group of clay minerals that are expected to be widely used in catalyst fabrication, radioactive element adsorption, and so forth, due to its excellent adsorption properties. However, the shape control limitation of the illite product should be overcome to maximize its utilization and properties. We herein propose additive manufacturing (AM) as one of the best solutions to solve this structural drawback. Digital light processing (DLP) technology with the film‐type of the material supplying system was adapted instead of the general vat‐type DLP system to increase illite printability. The photo‐curability and printability of illite‐contained photocurable suspension were optimized. The color effect due to different ferric oxide content in yellow‐ and white‐illite which influence the photopolymerization process also adjusted thoroughly. White illite showed better photo‐curability and could be increased solid loading than yellow illite. The defect‐free illite products with three‐dimensional complex structures, which cannot be produced by typical ceramic processes, were obtained by DLP technology for both yellow‐ and white‐illite after sintering at 1100°C. The overcoming of shape control limitation of illites by ceramic AM proved in this study has excellent potential for expanding illite utilities in various applications.