Green Energy & Environment · 2021 · 54 citations · 50 references
Natural SciencesChemical EngineeringMaterials ScienceCarbohydrate ChemistryCatalysisNatural Product BiosynthesisCatalyst DesignCatalyst PreparationCatalyst SynthesisCatalytic MechanismsIndustrial CatalysisBiomass Conversion CatalysisHeterogeneous Catalyst PreparationHeterogeneous Catalyst SynthesisIsomerization CatalysisMesoporous Catalyst SynthesisMesoporous MaterialsOrdered Mesoporous CarbonSpecific Surface Area
In-situ MgO-doped ordered mesoporous carbon ([email protected]) was fabricated by formaldehyde-free self-assembly method, in which biomass-derived tannin was used as carbon precursor replacing fossil-based phenolics, Mg2+ as both cross-linker and precursor of catalytic sites. Up to ∼20 wt% MgO could be doped in the carbon skeleton with good dispersion retaining well-ordered mesoporous structures, while more MgO content (35 wt%) led to the failing in the formation of ordered mesoporous structure. The [email protected] possessed a high specific surface area (298.8 m2 g−1), uniform pore size distribution (4.8 nm) and small crystallite size of MgO (1.73 nm) due to the confinement effect of ordered mesoporous structure. Using [email protected] as the heterogeneous catalyst, a maximum fructose yield of 32.4% with a selectivity up to 81.1% was achieved from glucose in water (90 °C, 60 min), which is much higher than that obtained using the MgO doped active carbon via conventional post-impregnation method (26.5% yield with 58.3% selectivity). Higher reaction temperature (>90 °C) resulted in decrease of selectivity due to the formation of humins. The designed [email protected] displayed tolerant to high initial glucose concentrations (10 wt%) and could remain good recyclability without significant loss of activity for three cycles.
50
Dong Gu, Wei Li, Fei Wang et al. · Angewandte Chemie International Edition · 2015 · 381 citations
Natural Sciences, Materials Engineering, Materials Science +17