Single‐Ion Gel Polymer Electrolyte Based on Poly(ether sulfone) for High‐Performance Lithium‐Ion Batteries

Yingxue You, Xiaoxiao Liang, Pinhui Wang, Yanmiao Wang, Wanli Liu, Bairun Liu, Baijun Liu, Zhao‐Yan Sun, Wei Hu, Niaona Zhang

Macromolecular Materials and Engineering · 2021 · 12 citations · 39 references

Concepts

Abstract

Abstract In this study, a poly(ether sulfone) is grafted with lithium 3‐chloroproanesulfonyl(trifluoromethanesulfonyl)imide (LiCPSI) through Williamson reaction to obtain a poly(ether sulfone) single‐ion polymer (PES‐LiCPSI). PES‐LiCPSI and poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) are mixed and then soaked with plasticizer (EC/PC = 1:1, v/v) to obtain a novel single‐ion gel polymer electrolyte (PES‐GPE). Its ionic conductivity of the prepared electrolyte is 7.1 × 10 −5 S cm −1 at 20 °C, and the tensile strength is increased to 50.5 MPa. The lithium‐ion transfer number is up to 0.92, which should be helpful to inhibit the formation of lithium dendrites effectively. LiFePO 4 /PES‐GPE/Li half cells assembled with PES‐GPE possesses outstanding cycle performance and rate performance. It releases a specific capacity of 128 mAh g −1 at 0.2 C, and the capacity retention rate is as high as 97% after 370 cycles. The excellent properties of PES‐GPE demonstrate its massive capacity in high‐power and long‐cycle lithium‐ion batteries.

References

39