Journal of the Japan Institute of Metals and Materials · 1989 · 17 citations · 1 references
Natural SciencesMaterials EngineeringMaterials ScienceCrystal StructureMetallic MaterialsNanomaterialsAlloysGrain Structure FormationMetal MaterialsMetal Oxide NanomaterialsMetalsPowder ProcessingIron-based AlloysParticle Specific Surface AreaSpecific Surface AreaSpecific Surface Area AnalysisSurface AreaTitanium AlloysUltrafine Particle FormationUltrafine Particles
In order to create the composite ultrafine particles of metal and ceramics, ultrafine particles (UFP) of Fe-TiN, Ni-TiN and Co-TiN systems were prepared by arc melting, vaporization and deposition of binary Fe-Ti, Ni-Ti and Co-Ti alloys in an atmosphere of a nitrogen-hydrogen mixed gas (“reactive plasma-metal” reaction) at 0.1 MPa pressure. The crystal structure, the chemical composition, the morphology and the specific surface area of obtained UFP were determined by X-ray diffractometry, energ dispersion analysis for X-ray, transmission electron microscopy and the BET method, respectively.Crystal structures of UFP obtained from Me (Fe, Ni or Co)-Ti parent alloys containing less than about 40-50 at%Ti were found to be a single phase of Me (α-Fe, Ni or β-Co), but in the case of titanium contents higher than about 40-50 at%, the TiN phase (NaCl type structure) was found in UFP. The TiN concentration of the obtained UFP remarkably deviated negatively compared with titanium concentration of the Me-Ti parent alloys over the entire composition range. It agreed very closely with the apparent vapor composition of Me-Ti parent alloys measured by “hydrogen plasma-metal” reaction.The composite UFP consisting of TiN and Me particles, whose morphlogy were dumbell-like or dice-like particles was found in UFP obtained from the parent alloys containing more than 50 at%Ti. The formation mechanism (LS mechanism) of the composite UFP was presumed as follows: (i) vaporization of Me and Ti into the nitrogen atmosphere, (ii) nucleation of TiN owing to the reaction of Ti vapor with nitrogen, (iii) deposition of a Me-Ti-N melt on the TiN nucleus, (iv) crystallization of TiN on the TiN nucleus from the Me-Ti-N melt, (v) solidification of residual Me-rich melt (composite UFP is formed).
1
Max Hansen, K. Anderko, H. W. Salzberg · Journal of The Electrochemical Society · 1958 · 14.8K citations