NASA Technical Reports Server (NASA) · 1993 · 16 citations · 0 references
Open access
EngineeringMaterials EngineeringMaterials ScienceFinite Element AnalysisMechanical Behavior Of MaterialsStructural AnalysisComposite MaterialsComposite StructuresMaterial PropertiesMechanics Of Composite MaterialsStrength Of MaterialsStructural MechanicsComposite Constitutive ModelingComposite Mechanical PropertiesComposite Stress AnalysisElastic ConstantsElastic ModuliFinite Element ModelingFinite Element Stress AnalysisUnit Cell Geometry
This report concerns the prediction of the elastic moduli and the internal stresses within the unit cell of a fabric reinforced composite. In the proposed analysis no restrictions or assumptions are necessary concerning yarn or tow cross-sectional shapes or paths through the unit cell but the unit cell itself must be a right hexagonal parallelepiped. All the unit cell dimensions are assumed to be small with respect to the thickness of the composite structure that it models. The finite element analysis of a unit cell is usually complicated by the mesh generation problems and the non-standard, adjacent-cell boundary conditions. This analysis avoids these problems through the use of preprogrammed boundary conditions and replacement materials (or elements). With replacement elements it is not necessary to match all the constitutional material interfaces with finite element boundaries. Simple brick-shaped elements can be used to model the unit cell structure. The analysis predicts the elastic constants and the average stresses within each constituent material of each brick element. The application and results of this analysis are demonstrated through several example problems which include a number of composite microstructures.