Transfund New Zealand research report · 2001 · 12 citations · 0 references
EngineeringCivil EngineeringMechanical Behavior Of MaterialsPavement EngineeringTransportationPavement DesignPavement MaterialsPavement Performance AnalysisHeavy-duty PavementsLoadPavement Structural PerformancePower-law ModelSurface DeformationWear
In order to improve thc efficiency of the road transport industry in New Zealand, a range of mass limit increases for heavy vehicles has been proposed. Some of the options for mass increases include increasing the axle load limit, which would inevitably lead to increased road wear. In this study, carried out between 1999 and 2001, an accelerated loading test was undertaken at the Canterbury Accelerated Pavement Testing Indoor Facility (CAPTIF) to compare the wear generated by different levels of loading. The pavement consisted of four different segments that were subjected to one million load cycles in two parallel wheel paths. The axle load on one wheel path was 80kN while the load on the other was 100kN. As a result the compaction-wear model for VSD (Vertical Surface Deformation) has been developed, which provides a much better fit to the observed behaviour, than the conventional power law model, for thin-surface unbound pavement structures. (a)