Journal of Materials Research and Technology · 2021 · 32 citations · 36 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloy SolidificationAlloysGrain RefinementGrain Structure FormationMetalsPhysical MetallurgyCryogenic TreatmentDislocation DensityDislocation Density EvolutionMagnesium AlloysPrecipitatesSoaking TimeTensile StrengthUltimate Tensile Strength
The effects of deep cryogenic treatment (DCT) on the tensile property and microstructure of Mg-9Gd-4Y–2Zn-0.5Zr(wt.%) alloy were investigated by comparing the alloy treated by solution treatment, deep cryogenic treatment and aging treatment (ST + DCT + AT) and that treated by solution treatment and aging treatment (ST + AT). The lamellar 14H-type long-period stacking ordered (14H-LPSO) in grain was precipitated in the alloy treated by ST + AT. However, the particle and needle-like Mg5RE (RE = Gd, Y) phases instead of the lamellar 14H-LPSO were precipitated, and a high-density dislocation existed in the alloy treated by ST + DCT. The greater ultimate tensile strength (UTS) and yield strength (YS) of the alloy treated by ST + DCT + AT were obtained because of the precipitation of the Mg5RE phases. The trend, the UTS and YS firstly increased then decreased with the increasing of soaking time, is corresponding to the volume fraction increasing and size-coarsening of Mg5RE precipitates, respectively. The greater elongation (EL) was obtained after the short-time DCT for 0–2 h (DCT0h-DCT2h) and the smaller EL was obtained for the long soaking time (>DCT2h). The fracture mode of the samples is all quasi-cleavage fracture.
36
Effect of Zn additions on the age-hardening of Mg–2.0Gd–1.2Y–0.2Zr alloys
T. Honma, Tadakatsu Ohkubo, S. Kamado et al. · Acta Materialia · 2007 · 500 citations
Natural Sciences, Materials Engineering, Materials Science +16
The building block of long-period structures in Mg–RE–Zn alloys
Yuman Zhu, Matthew Weyland, A.J. Morton et al. · Scripta Materialia · 2009 · 213 citations
Natural Sciences, Materials Engineering, Materials Science +12
Characterization of planar features in Mg–Y–Zn alloys
Yuman Zhu, A.J. Morton, Matthew Weyland et al. · Acta Materialia · 2009 · 108 citations
Natural Sciences, Materials Engineering, Materials Science +12