Materials · 2021 · 20 citations · 46 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMaterials ProcessingSurface ScienceCorrosion EvaluationCorrosion MechanismsCorrosion ResistanceCorrosion TestingCorrosion-resistant MaterialsSurface CharacterizationBioactivityCorrosion PotentialCorrosion Potential AnalysisCorrosion Potential MeasurementHydroxyapatiteSurface BioactivityTitanium Alloy CorrosionTitanium Alloys
The influence of cooling conditions and surface topography after finish turning of Ti6Al4V titanium alloy on corrosion resistance and surface bioactivity was analyzed. The samples were machined under dry and minimum quantity lubrication (MQL) conditions to obtain different surface roughness. The surface topographies of the processed samples were assessed and measured using an optical profilometer. The produced samples were subjected to electrochemical impedance spectroscopy (EIS) and corrosion potential tests (Ecorr) in the presence of simulated body fluid (SBF). The surface bioactivity of the samples was assessed on the basis of images from scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) analysis. The inspection of the surfaces of samples after turning under dry and MQL conditions revealed unevenly distributed precipitation of hydroxyapatite compounds (Ca/P) with a molar ratio in the range of 1.73–1.97. Regardless of the cutting conditions and surface roughness, the highest values of Ecorr ~0 mV were recorded on day 7 of immersion in the SBF solution. The impedance characteristics showed that, compared to the MQL conditions, surfaces machined under dry conditions were characterized by greater resistance and the presence of a passive layer on the processed surface. The main novelty of the paper is the study of the effect of ecological machining conditions, namely, dry and MQL cutting on the corrosion resistance and surface bioactivity of Ti6Al4V titanium alloy after finish turning. The obtained research results have practical significance. They can be used by engineers during the development of technological processes for medical devices made of Ti6Al4V alloy to obtain favorable functional properties of these devices.
46
Gurraj Singh, Catalin I. Pruncu, Munish Kumar Gupta et al. · Materials · 2019 · 254 citations · Full text
Engineering, Manufacturing Engineering, Materials Engineering +17
Effect of surface finish on the osseointegration of laser-treated titanium alloy implants
H. Götz, M. E. Müller, A. Emmel et al. · Biomaterials · 2003 · 239 citations
Radosław W. Maruda, Grzegorz Królczyk, E. Feldshtein et al. · International Journal of Machine Tools and Manufacture · 2015 · 238 citations
Bruna Carolina Costa, Cíntia Kazuko Tokuhara, L.A. Rocha et al. · Materials Science and Engineering C · 2018 · 223 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +15