Wireless HART stack using multiprocessor technique with laxity algorithm

Abstract

The use of a real-time operating system is required for the demarcation of industrial wireless sensor network (IWSN) stacks (RTOS). In the industrial world, a vast number of sensors are utilised to gather various types of data. The data gathered by the sensors cannot be prioritised ahead of time. Because all of the information is equally essential. As a result, a protocol stack is employed to guarantee that data is acquired and processed fairly. In IWSN, the protocol stack is implemented using RTOS. The data collected from IWSN sensor nodes is processed using non-preemptive scheduling and the protocol stack, and then sent in parallel to the IWSN's central controller. The real-time operating system (RTOS) is a process that occurs between hardware and software. Packets must be sent at a certain time. It's possible that some packets may collide during transmission. We're going to undertake this project to get around this collision. As a prototype, this project is divided into two parts. The first uses RTOS and the LPC2148 as a master node, while the second serves as a standard data collection node to which sensors are attached. Any controller may be used in the second part, depending on the situation. Wireless HART allows two nodes to communicate with each other.