Journal of Materials Research and Technology · 2021 · 25 citations · 34 references
EngineeringMaterials EngineeringMechanical Behavior Of MaterialsMetallurgyStructural MaterialsFracture MechanicsFracture ToughnessFriction Stir WeldingJoint StrengthWeldingWelding ProcessesFatigue In Welded JointsFatigue StrengthFatigue Strength Of JointsFriction Stir Welding ProcessTensile StrengthUltimate Strength AnalysisUltimate Tensile StrengthWelded Joints
In this study, 6802-T6 alloy plates were welded using tools with different pin lengths. Different depths of incomplete penetration defects, including kissing bond (K) defect and remain joint surface (R) defect, were obtained. Mechanical fracture and kernel average misorientation (KAM) maps indicated that joint root tearing caused K defect during the friction stir welding (FSW) process. The critical value for incomplete penetration geometry appeared to be a depth of 0.4 mm. Within this interval, the ultimate tensile strength of the joint (thickness of 3 mm) was more than 224 MPa, and the fatigue strength exceeded 70 MPa at 107 cycles.
34