Fabrication of Robust Superhydrophobic Nickel Films on Steel Surface With High Corrosion Resistance, Mechanical and Chemical Stability

Abstract

Abstract Superhydrophobic films were successfully grafted on a steel substrate using potentiostatic electrodeposition of nickel followed by treatment with myristic acid (MA) as a low surface energy material. A scanning electron microscope (SEM) was used to investigate the surface topography of the prepared superhydrophobic films. The results revealed that the prepared Ni films modified by myristic acid have micro-nano structures. Fourier transform infrared spectrophotometer (FTIR) and X-ray diffraction (XRD) measurements showed that the steel substrate was coated with nickel film modified with myristic acid. Three different nickel films were prepared: the Ni-MA (I) deposited from pure nickel sulfate bath (1.0 M NiSO4), Ni-MA (II) deposited from pure nickel chloride bath (1.0 M NiCl2. 6H2O), and the third Ni-MA (III) film deposited from Watts bath (0.2 M NiCl2. 6H2O and 0.8M NiSO4). The superhydrophobic Ni-MA (I) film has the highest corrosion resistance, chemical stability, and mechanical abrasion resistance, while Ni-MA (II) film has the lowest properties.