Metals · 2021 · 13 citations · 33 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallic MaterialsAlloysComposite MaterialsMetal Matrix CompositesReinforcement MaterialsWear ResistanceWear-resistant MaterialsAluminium AlloysAluminum AlloysAluminum Matrix CompositesDry SlidingMechanical AlloyingNanoparticlesWear BehaviorWear Resistance Improvement
The present research deals with the comparative wear behavior of a mechanically milled Al-6061 alloy and the same alloy reinforced with 5 wt.% of Al2O3 nanoparticles (Al-6061-Al2O3) under different dry sliding conditions. For this purpose, an aluminum-silicon-based material was synthesized by high-energy mechanical alloying, cold consolidated, and sintered under pressureless and vacuum conditions. The mechanical behavior was evaluated by sliding wear and microhardness tests. The structural characterization was carried out by X-ray diffraction and scanning electron microscopy. Results showed a clear wear resistance improvement in the aluminum matrix composite (Al-6061-Al2O3) in comparison with the Al-6061 alloy since nanoparticles act as a third hard body against wear. This behavior is attributed to the significant increment in hardness on the reinforced material, whose strengthening mechanisms mainly lie in a nanometric size and homogeneous dispersion of particles offering an effective load transfer from the matrix to the reinforcement. Discussion of the wear performance was in terms of a protective thin film oxide formation, where protective behavior decreases as a function of the sliding speed.
33
Mechanical alloying and milling
C. Suryanarayana · Progress in Materials Science · 2001 · 7.9K citations
Engineering, Manufacturing Engineering, Materials Science +12
Contact and Rubbing of Flat Surfaces
J. F. Archard · Journal of Applied Physics · 1953 · 7.7K citations
Pradeep Kumar Krishnan, John Victor Christy, Ramanathan Arunachalam et al. · Journal of Alloys and Compounds · 2019 · 210 citations