Journal of Magnesium and Alloys · 2021 · 25 citations · 36 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyStructural MaterialsAlloysCastingDeformation MechanismsDislocation MechanicsGrain Structure AnalysisMicrostructure AnalysisCrack PropagationCrack Propagation MechanismsDeformation BehaviorDie CastingGrain Orientation AnalysisMagnesium AlloysMicrostructureTensile Deformation
Both a conventional flow distributer and an improved one with a flow buffer were applied respectively during the high pressure die casting (HPDC) process, and samples of AZ91D magnesium alloy with different microstructure mainly consisting of α-Mg grains, β-phase and porosities were obtained. According to the grain orientation analysis, the predominant deformation behavior in α-Mg grains was dislocation slip, supplemented by deformation twinning. Dislocation slip was more difficult to occur in the samples with the improved flow distributer on account of the fact that the size of α-Mg grains in the microstructure was finer and more uniform. During the in situ tensile deformation test, cracks were observed to initiate from gas-shrinkage pore and island-shrinkage, and two main crack propagation mechanisms, porosity growth and coalescence were found accordingly. When the crack was in contact with the β-phase, it would pass through and fracture the network β-phase, whereas bypass the island β-phase by detaching it from the surrounding α-Mg grains. Mechanical property tests showed that the samples with relatively more homogeneous microstructure would perform higher mechanical properties, which was the combined effect of matrix α-Mg grains, β-phase, and porosities.
36
B. L. Mordike, T. Ebert · Materials Science and Engineering A · 2001 · 4.5K citations
Latest research advances on magnesium and magnesium alloys worldwide
Jiangfeng Song, Jia She, D.L. Chen et al. · Journal of Magnesium and Alloys · 2020 · 1.4K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
What is going on in magnesium alloys?
Xiaojun Wang, Daokui Xu, Ruizhi Wu et al. · Journal of Material Science and Technology · 2017 · 621 citations
Natural Sciences, Materials Engineering, Materials Science +12
Dilatant shear bands in solidifying metals
C.M. Gourlay, A. K. Dahle · Nature · 2007 · 245 citations
Natural Sciences, Materials Engineering, Materials Science +12