Numerical Simulation Study on Gain Nonlinearity of Microchannel Plate in Photomultiplier Tube

Lehui Guo, Pïng Chen, Lili Li, Yongsheng Gou, Hulin Liu, Ziyu Liu, Liwei Xin, Jinshou Tian

IEEE Transactions on Nuclear Science · 2021 · 10 citations · 12 references

DOIFull text

Open access

Concepts

Abstract

Microchannel plate-photomultiplier tubes (MCP-PMTs) with high dynamic ranges and strong outputs are still challenges for the future inertial confinement fusion (ICF) studies, aiming at detecting the large-scale intensities of the radiation pulses. In this article, to investigate the influence factors of the gain nonlinearity causing high-linearity limits of the MCP-PMTs, 3-D microchannel plate (MCP) channel models were built in computer simulation technology (CST) Particle Studio. The Monte Carlo and particle-in-cell methods were carried out to simulate the electron cascade processes in the channels of the MCPs. The dependences of MCP gain nonlinearity on the number of incident electrons, operating voltage, and secondary electron emission (SEE) yield properties were studied. The gains obtained by the simulations for the conventional one-stage and two-stage MCPs are in good agreement with the available experimental data, which verifies the reliabilities of the 3-D MCP models. The simulation results show that the gain of the MCP single channel decreases as the number of incident electrons increases due to the space charge effects. The higher the operating voltage and SEE yield of the MCP, the faster the gain deteriorates. To mitigate the gain saturation effect of MCP single channels, a novel structural design of MCP-PMTs has been proposed by adjusting the design of the MCP chevron pair. A significant improvement in the output pulse peak can be obtained.

References

12