Energies · 2021 · 38 citations · 35 references
EngineeringEarth SciencesGeological EngineeringEngineering GeologyGeotechnical EngineeringRock MechanicsRock DegradationRock FailureRock Mass CharacterizationRock PropertiesRock StrengthThermal Effects In RockEngineering SimulationsGasificationHeat Transfer In Rock MassesNumerical SimulationRock Damage ZoneRock Strength DegradationRock Thermal ModelingTemperature Dependency
This article presents the results of laboratory tests regarding the influence of high temperatures on changes in the strength and structural parameters of rocks that are present in the immediate vicinity of a gasification channel. Sandstone and claystone samples were heated at 300 °C, 600 °C, 900 °C and 1200 °C. Additionally, the heated samples were placed in water for 24 h. The results of the laboratory tests were used in the numerical simulation using RS2 software. The main goal of modeling was to determine the extent of the rock destruction zone around the gasification channel for dry and wet rock masses. In the numerical simulations, three widths of the gasification channel and three ranges of high-temperature impact were modeled. On the basis of the obtained results, it was found that the extent of rock destruction, both in the roof and in the floor, is greater by several percent for a wet rock mass. For the first time, this research presents the effect of water on heated rock samples in terms of the underground coal gasification process. The results of laboratory tests and numerical simulations clearly indicate a reduction in strength, deformation and structural parameters for the temperature of 1200 °C.
35
Physical Properties of Sandstones After High Temperature Treatment
Hong Tian, Thomas Kempka, Nengxiong Xu et al. · Rock Mechanics and Rock Engineering · 2012 · 254 citations
Engineering, Geology, Rock Mechanics +12