Sensors · 2021 · 40 citations · 34 references
EngineeringComputer EngineeringField-programmable Gate ArraysHardware-software Co-designReconfigurable ComputingDigital Signal ProcessingField-programmable Gate Array ArchitectureFpga ArchitectureRadar Clutter SuppressionRadar Signal ProcessingRadar SystemsFast Fourier TransformFloating-point Unit DesignFourier TransformFrequency Modulated Continuous-wave RadarFrequency-modulated Continuous-wave RadarHardware ResourcesRadar Hardware ArchitectureTarget Detection
This paper presents the design and implementation results of an efficient fast Fourier transform (FFT) processor for frequency-modulated continuous wave (FMCW) radar signal processing. The proposed FFT processor is designed with a memory-based FFT architecture and supports variable lengths from 64 to 4096. Moreover, it is designed with a floating-point operator to prevent the performance degradation of fixed-point operators. FMCW radar signal processing requires windowing operations to increase the target detection rate by reducing clutter side lobes, magnitude calculation operations based on the FFT results to detect the target, and accumulation operations to improve the detection performance of the target. In addition, in some applications such as the measurement of vital signs, the phase of the FFT result has to be calculated. In general, only the FFT is implemented in the hardware, and the other FMCW radar signal processing is performed in the software. The proposed FFT processor implements not only the FFT, but also windowing, accumulation, and magnitude/phase calculations in the hardware. Therefore, compared with a processor implementing only the FFT, the proposed FFT processor uses 1.69 times the hardware resources but achieves an execution time 7.32 times shorter.
34
Remote Monitoring of Human Vital Signs Using mm-Wave FMCW Radar
Mostafa Alizadeh, George Shaker, João Carlos Almeida et al. · IEEE Access · 2019 · 518 citations · Full text
Engineering, Biomedical Engineering, Electrical Engineering +17