Journal of Materials Research and Technology · 2021 · 35 citations · 38 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysMetal Matrix CompositesMetalsMicrostructure ControlWeldingWelding ProcessesAluminium AlloysAluminum AlloysAluminum Matrix CompositesCrack SusceptibilityEutectic MicrostructureTensile StrengthUltimate Tensile StrengthWeld Metal Microstructure
Owing to the notorious hot-crack susceptibility and severe softening fusion-weld joints of Al–Zn–Mg–Cu alloys, they are generally considered unweldable. In this study, TiC/7xxx (TC) and TiC–TiB2/7xxx (BC) aluminum matrix composites, fabricated by in-situ mixed-salt reaction, were used as filler rods of spray formed 7055 alloys to modify the microstructure and mechanical properties of TIG weld joints. Compared with 7055-weld metal (WM), the grain sizes of TC-WM and BC-WM were refined from 100 μm to 24 μm and 26 μm, respectively. The precipitation of eutectic phases in WM was reduced by ceramic particles, which decreased the hot-crack susceptibility of joints. In the as-welded state, the ultimate tensile strength of TC and BC joints increased from 240 ± 5 MPa to 274 ± 5 MPa and 300 ± 5 MPa, respectively. The addition of ceramic particles also improved the impact toughness and hardness of weld joints. Grain refinement, load-bearing strengthening, coefficients of thermal expansion mismatch strengthening, and Zener pinning strengthening are the dominant strengthening mechanisms of weld joints with ceramic particles.
38
Nanoparticle-induced unusual melting and solidification behaviours of metals
Chao Ma, Lianyi Chen, Chezheng Cao et al. · Nature Communications · 2017 · 136 citations · Full text
The influence of nanoparticles on dendritic grain growth in Mg alloys
Enyu Guo, Sansan Shuai, Daniil Kazantsev et al. · Acta Materialia · 2018 · 133 citations · Full text
Wetting of TiC by molten Al at 1123–1323K
Qiaoli Lin, Ping Shen, Longlong Yang et al. · Acta Materialia · 2010 · 106 citations
Natural Sciences, Materials Engineering, Materials Science +9