Comparison of different pretreatment methods on phosphorus release and recovery as struvite from excess sludge

Abstract

Recovering phosphorus (P) from excess sludge of wastewater treatment plants (WWTPs) has attracted considerable attention. An efficient P release method is undoubtedly critical for a satisfactory recovery performance. In this study, the effectiveness of three sludge pretreatment methods, i.e. anaerobic digestion (AD), EDTA-anaerobic digestion (EA) and ultrasound combined with EA (U-EA), on P release and struvite recovery from excess sludge was investigated. The results showed that different pretreatment methods resulted in the different characteristics of P release and recovery. For P release, the highest P release rate (57.14% of sludge total phosphorus, TP) was achieved by U-EA pretreatment, followed by EA and AD. Furthermore, U-EA was beneficial for sludge disintegration and reduction, by which the mixed liquor suspended solids (MLVSS) reduction rate reached 42.00% at a specific energy of 110,000 kJ/kg TS. For the P recovery (in the form of struvite), there was only a little difference in the optimal conditions and P recovery rate (89.29-94.49% of TP in the supernatant). AD pretreatment was beneficial for the purity of products and achieved the highest struvite purity (85.14%), followed by EA (80.95%) and U-EA (77.56%). In summary, the highest recovery rate of TP from excess sludge (53.50% of sludge TP) and struvite yield (26.10 mg/gSS) was obtained by U-EA.