1c:I[419806,["/_next/static/chunks/bb923814e1f4d2e9.js","/_next/static/chunks/dd3ee9f5b7716ca6.js","/_next/static/chunks/4204a0ae82542ca8.js","/_next/static/chunks/1270dead247da766.js","/_next/static/chunks/6e1aa89a642f40be.js","/_next/static/chunks/2d7aa753e81324a8.js","/_next/static/chunks/8ffd0b71567920d8.js","/_next/static/chunks/67ea6dfd21f16c5f.js","/_next/static/chunks/24eb4379f68013fd.js","/_next/static/chunks/b8cd775ffdf935bd.js","/_next/static/chunks/983103cd9eb7b428.js","/_next/static/chunks/263f2cdcb9aa2341.js","/_next/static/chunks/294b9525248c8e5f.js"],"default"] 1d:T4ca,2,3-Dialdehyde cellulose (DAC) of a high degree of oxidation (92% relative to AGU units) prepared by oxidation of microcrystalline cellulose with sodium periodate (48 °C, 19 h) is soluble in hot water. Solution casting, slow air drying, hot pressing, and reinforcement by cellulose nanocrystals afforded films (∼100 μm thickness) that feature intriguing properties: they have very smooth surfaces (SEM), are highly flexible, and have good light transmittance for both the visible and near-infrared range (89-91%), high tensile strength (81-122 MPa), and modulus of elasticity (3.4-4.0 GPa) depending on hydration state and respective water content. The extraordinarily low oxygen permeation of <0.005 cm³ μm m^-2 day^-1 kPa^-1 (50% RH) and <0.03 cm³ μm m^-2 day^-1 kPa^-1 (80% RH) can be regarded as a particularly interesting feature of DAC films. The unusually high initial contact angle of about 67° revealed a rather low hydrophilicity compared to other oxidatively modified or unmodified cellulosic materials which is most likely the result of inter- and intramolecular hemiacetal and hemialdal formation during drying and pressing.1e:T5bc,

	Year	Citations

References