OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 2000 · 11 citations · 4 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationSurface EngineeringUltrasoundDefect CharacterizationDefectsManufacturing DefectsMaterial TestingNon-destructive EvaluationUltrasonicsCracksEddy Current InspectionEddy Current TestingNon-destructive TestingNondestructive TestingNondestructive Testing Of MaterialsUltrasonic InspectionUltrasonic Testing
This paper presents results from a literature review of defect characteristics essential for nondestructive testing (NDT). Most of the major NDT methods are included in the study - ultrasonic testing (UT), radiography (RT) and eddy current testing (ET). The study was performed by means of searching in scientific databases, technical journals, conference proceedings etc. Mainly the following databases were used: CHANS (Chalmers database), INSPEC, NTIS, Ei Compendex, World Surface Coating Abs, METADEX, JICST-Eplus, Aerospace database, Pascal, Eng Materials, SciSearch and Weldasearch. It is concluded that for eddy current testing, the defect geometry, the defect size and the defect orientation influence the outcome signal. A number of investigations address the relationships between the defect parameters like defect depth, length and width and the outcome signal parameters like amplitude, phase and signal shape. Also the phenomena of the electrical contacts between the defect surfaces (for a crack) was studied. Defect parameters that are essential to the quality of ultrasonic testing are defect position in the object (includes the depth), orientation, size, crack surface roughness, closure and tip radius. This investigation has been focused on those parameters that are not that easy to reconstruct and only briefly discussed the influence on the signal response due to defect position, orientation and size. When it comes to radiographic techniques, the most important defect related parameters that influence the quality are the difference in radio opacity of the specimen and defect and the angle between the volumetric extension of the defect and the direction of projection. The defect gape and the morphology of the crack are also very essential parameters. A very simple model of the detectability as a function of depth, width and misorientation (angle to the radiation beam) has been validated and to some extent also verified in a number of papers. Even for defects with very individual morphology, such as typical stress corrosion cracks, this very simplified model has proven to be valid. The results of the study are used to establish the characteristics of manufactured defects that must be controlled to produce defects that are similar to the ones of real in-service induced defects. Finally, the proposal. for the future investigation to attend the lack of knowledge about essential defect characteristics is made.
4