International Journal of Pavement Engineering · 2021 · 36 citations · 40 references
EngineeringCivil EngineeringFinite Element AnalysisPavement EngineeringStructural EngineeringPavement DesignPavement EvaluationPavement Performance AnalysisPavement Structural AnalysisStructural Finite Element AnalysisStructural Response AnalysisDeflection MeasurementFinite Element ValidationPavement Response AnalysisPavement Response ModelingPavement Structural Capacity AssessmentPavement Structural EvaluationPavement Structural PerformanceStructural Capacity Evaluation
The traditional practice for pavement structural capacity evaluation is mostly dependent on the falling weight deflectometer (FWD) measurements. However, this practice has several challenges due to its stationary nature. Recently, a Rolling Weight Deflectometer (RWD), capable of measuring the pavement deflections at regular traffic speeds, has been introduced into the market. This research aims to develop a finite element (FE) model simulating pavement structural response under the moving RWD loads. This model could be further utilised for accurately estimating pavement layers mechanical characteristics. The model was successfully validated utilising the RAPTOR (a commercially available RWD) data collected on the National Center for Asphalt Technology (NCAT) test track. A good correlation between the simulated and the measured values was found – yielding an average root mean square percentage error (RMSPE) of approximately 2.40% between the RAPTOR and the FE deflections.
40
Finite Element Methods for Maxwell's Equations
Peter Monk · Oxford University Press eBooks · 2003 · 1.9K citations