Numerical investigation of thermal striping at a mixing tee using detached eddy simulation

Akira Nakamura, Toru Oumaya, Nobuyuki Takenaka

OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 2009 · 19 citations · 0 references

Concepts

Abstract

Thermal fatigue crack may initiate at mixing tee where high and low temperature fluids flow in and mix. In this paper, result of a series of numerical simulations was presented which intended to simulate temperature fluctuation in mixing tee without turbulence model (laminar) and with detached eddy simulation (DES). Accuracy of these simulations was examined for two velocity conditions of WATLON experiments performed at Japan Atomic Energy Agency: wall jet condition that the jet from the branch pipe flowed along the main pipe wall, and impinging jet condition that the jet reached the other side of the main pipe. Intensity of temperature fluctuation in the wake of jet without turbulence model and with DES agreed well with the experimental results, but there was some difference especially with DES due to location of the jet flow. The vortex structures, which were dominant in temperature fluctuation, were omega-shaped arch vortices for the wall jet condition and inverted U shaped arch vortices for the impinging jet condition. (author)