ACS Sustainable Chemistry & Engineering · 2021 · 246 citations · 45 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsBio-based MaterialsBiodegradable PolymersComposite MaterialsFiber-reinforced CompositesNanocompositesRecycled MaterialsBio-based CompositesBio-based Recycled CompositesCarbon Fiber ReinforcementComposite Mechanical PropertiesComposite RecyclingEpoxy ResinsTensile StrengthVitrimer Chemistry
The study aims to develop a simple, high‑performance biobased epoxy vitrimer and demonstrate its use in fully recycled carbon‑fiber reinforced composites. The vitrimer is synthesized from glycerol triglycidyl ether and a vanillin‑derived imine hardener, and its amine–imine exchange enables damage‑free recycling of carbon‑fiber fabrics by resin degradation in an amine solution. The vitrimer shows a 1.6 GPa modulus and 62 MPa tensile strength comparable to bisphenol‑A epoxy, while offering excellent reprocessability, UV shielding, and full recycling of carbon‑fiber composites with retained mechanical performance.
A novel biobased epoxy vitrimer (Gte-VA) with desirable mechanical properties was synthesized from glycerol triglycidyl ether (Gte) and an imine-containing hardener (VA), which was also a biobased compound from vanillin and 4-aminophenol. The biobased epoxy vitrimer shows Young's modulus of 1.6 GPa and tensile strength of 62 MPa, which is close to the value of amine-cured bisphenol A diglycidyl ether. In addition, it shows excellent reprocessability, recyclability, and UV shielding performance and can be used as a matrix to prepare carbon fiber (CF)-reinforced composites. Based on the amine–imine reversible exchange reaction of the imine bonds, the CF fabric could be recycled without damage from the composite, after degrading the resin in an amine solution. Especially, after recombining the degraded resin with recycled carbon fiber fabric, a regenerated carbon fiber reinforced composite with similar mechanical properties to the original composite can be obtained, achieving full recycling of the carbon fiber reinforced composite. This work will open a door to the development of simple procedures of high-performance biobased epoxy vitrimer and its application in fully recycled carbon fiber reinforced composite.
45
Silica-Like Malleable Materials from Permanent Organic Networks
Damien Montarnal, Mathieu Capelot, François Tournilhac et al. · Science · 2011 · 3.4K citations
Natural Sciences, Materials Engineering, Materials Science +16
Alaitz Ruiz de Luzuriaga, Roberto Martín, Nerea Markaide et al. · Materials Horizons · 2016 · 874 citations
Natural Sciences, Materials Engineering, Materials Science +17