U-Values. For better energy performance of buildings

Thomas Boermans, Carsten Petersdorff

OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · 2007 · 42 citations · 0 references

Concepts

Abstract

The calculations of the overall energy performance of buildings, according to the Energy Performance Buildings Directive (EPBD) has to consider an integrated approach that takes into account all building related energy losses and gains. National or regional energy performance requirements are given in national or regional regulations for fully integrated overall energy performance. In many countries additional requirements on the maximum energy transmission for single building components expressed in U-values or R-values are given, reflecting the knowledge that it saves costs and improves comfort to ensure first a low energy demand of a building before supplying the remaining energy demand in the most efficient way. However the national U-value requirements for building components (roof, floor, wall, windows, etc.) often describe minimum requirements that do not reflect the economic optimum or specific environmental targets. Additionally, the sharp rise in energy prices of the last years and current discussions on climate protection targets have considerably changed the boundary conditions for applying insulation to buildings in Europe. This study therefore aims to contribute to the discussion of policymakers and regulators concerning reconsideration of the national or regional required or recommended U-values for building components. Regarding the recommendation of U-values, one could choose for a financial point of view and calculate an economic optimum for insulation levels derived from the necessary investment costs and according energy cost savings from reduced heating and cooling energy demand. Another approach is to calculate necessary insulation levels to meet climate protection targets. In this study the results for both approaches have been assessed.