Rare Metals · 2021 · 31 citations · 26 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysDuctilityHigh-temperature MaterialsMetalsMicrostructure ControlPowder MetallurgyAlloyingAlloying ElementsElectron Beam MeltingHigh-temperature Alloys
Abstract The microstructure and high‐temperature tensile property of a Ti‐47Al‐2Cr‐2Nb alloy fabricated via selective electron beam melting (SEBM) with hatch spacings of 85, 100, and 115 μm were systematically investigated. When the hatch spacing increased from 85 to 115 μm, the microstructure comprising the horizontal cross section changed from coarse lamellar (γ/B2) colonies to an inhomogeneous structure and the grain morphology transformed from elongated grains to inhomogeneous and equiaxed grains along the building direction of the vertical cross section. The boundary population of the SEBM‐produced TiAl alloy samples was dominated by high‐angle grain boundaries (≥ 15°), and the volume fraction of these boundaries decreased with hatch spacing increasing. Additionally, the as‐built TiAl alloy sample produced under a spacing of 100 μm exhibited the highest room‐ and elevated‐temperature tensile strengths, with the ultimate tensile strength at room temperature (642 MPa) increasing to 674 MPa at 700 °C. Furthermore, the mechanism of anomalous strengthening at 700 °C was discussed in detail.
26
Ultrahigh Strength and High Electrical Conductivity in Copper
Lei Lu, Y.F. Shen, Xianhua Chen et al. · Science · 2004 · 3.3K citations
Natural Sciences, Materials Engineering, Materials Science +17
Ordered intermetallic alloys, part III: Gamma titanium aluminides
Young‐Won Kim · JOM · 1994 · 795 citations
Natural Sciences, Materials Engineering, Materials Science +12
Polysynthetic twinned TiAl single crystals for high-temperature applications
Guang Chen, Yingbo Peng, Gong Zheng et al. · Nature Materials · 2016 · 776 citations
Natural Sciences, Materials Engineering, Materials Science +13