Advances in Materials and Processing Technologies · 2020 · 52 citations · 22 references
EngineeringMaterials EngineeringMaterials ScienceAdditive ManufacturingManufacturing ProcessesPolymer MaterialsComposite MaterialsFabrication MaterialsMaterial ExtrusionPolymer Additive ManufacturingComposite Filament ProcessingExtrusionFilament ExtrusionFilament MaterialsLayer Thickness EffectsPolylactic Acid MaterialsSingle-screw ExtrusionTensile Strength
Fused deposition modelling (FDM) is the extensively used additive manufacturing technology because of its ability to make specimens having a complicated geometrical shape in a decent amount of time. In the present research work, the entire filament fabrication sequence is analysed, starting with the polymer granules, filament production by an extrusion process and test specimen printing. Polylactic acid (PLA) granules were used to fabricate the filament using a single screw extruder. Then after, this in-house fabricated PLA filament was used to make tensile specimens using an open-source FDM machine. Tensile testing was carried out to analyse the tensile properties of FDM printed PLA parts. The influence of the FDM processing parameters viz. raster angle, layer thickness and raster width have been investigated. It has been observed that the raster angle is a significant parameter for tensile strength. Further, a scanning electron microscope (SEM) analysis has been carried out to study various failure modes.
22
J.M. Chacón, M.A. Caminero, Eustaquio García Plaza · Materials & Design · 2017 · 1.5K citations
Engineering, Manufacturing Engineering, Materials Engineering +14