e-Polymers · 2021 · 61 citations · 37 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsBiodegradable PolymersComposite MaterialsNanocompositesPolymer BlendsPolymer CharacterizationPolymer NanocompositesBiodegradable Polymer NanocompositesBlending Of Biodegradable PolymersImpact StrengthInterfacial AdhesionMechanical Properties Of NanocompositesPolymeric NanocompositesRheological MeasurementsToughness
Abstract Biodegradable nanocomposites were prepared by melt blending biodegradable poly(lactic acid) (PLA) and poly(butylene adipate- co -butylene terephthalate) (PBAT) (70/30, w/w) with diatomite or talc (1–7%). From the SEM test, the particles were transported to the interface of two phases, which acted as an interface modifier to strengthen the interfacial adhesion between PLA and PBAT. Talc and diatomite acted as nucleating agents to improve the crystallization of PBAT in the blends by DSC analysis. Moreover, adding the particles improved the tensile and impact toughness of the blends. The elongation at break with 5% talc was 78% (vs ∼21%) and the impact strength was 15 kJ/m 2 (vs ∼6.5 kJ/m 2 ). The rheological measurement revealed that the talc and diatomite reduced the viscosity of the blends. The results showed a good possibility of using talc- and diatomite-filled PLA/PBAT blends with high toughness for green-packaging and bio-membranes application.
37
Racha Al-Itry, Khalid Lamnawar, Abderrahim Maazouz · Polymer Degradation and Stability · 2012 · 868 citations
Francesca Signori, Maria‐Beatrice Coltelli, Simona Bronco · Polymer Degradation and Stability · 2008 · 473 citations
Natural Sciences, Materials Engineering, Materials Science +17
Filipe V. Ferreira, Luciana De Simone Cividanes, Rubia F. Gouveia et al. · Polymer Engineering and Science · 2017 · 441 citations
Natural Sciences, Materials Engineering, Materials Science +17