ACS Omega · 2021 · 78 citations · 53 references
EngineeringChemical EngineeringEnvironmental EngineeringWastewater ReuseWastewater TreatmentWater TreatmentAdsorption At InterfacesAdsorption ProcessesAdsorptive SeparationsIon ExchangePorous MaterialsSurface AdsorptionAdsorbent CharacterizationAdsorption CapacityAdsorption KineticsAdsorption StabilityAdsorption TreatmentAlginate BeadsIonic StrengthPorous Adsorbents
network (PAM/CA) decorated with polyethylene glycol as a pore-forming agent. The porous PAM/CA was characterized using scanning electron microscopy, Brunauer-Emmett-Teller, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analysis. The adsorption kinetics, isotherms, adsorption stability, and reusability studies of the adsorbent toward Cu(II) ions were scrutinized. The column performance of porous PAM/CA was tested with Cu(II)-containing electroplating wastewater. After Cu(II) adsorption, the Cu(II)-adsorbed PAM/CA (PAM/CA@Cu) was applied to remove TC from aqueous solutions without any regeneration process. The effects of pH, initial TC concentration, ionic strength, and coexisting ions on the adsorption were also discussed in detail. Compared with many reported adsorbents, the PAM/CA@Cu exhibited an excellent adsorption performance toward TC with a maximum adsorption capacity of 356.57 mg/g predicted by the Langmuir model at pH 5.0 and 30 °C with the absence of coexisting ions. The possible adsorption mechanism of TC onto the PAM/CA@Cu was revealed.
53
Bo Chen, Huinan Zhao, Sijiang Chen et al. · Chemical Engineering Journal · 2018 · 380 citations
Engineering, Chemical Engineering, Environmental Engineering +17