An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Abstract

Medical X-ray computed tomography requires imaging at a low dose rate and in a large area. Halide perovskites have shown high potential for X-ray detection, but a pressing challenge is the current lack of low-cost methods for large-scale fabrication of high-quality thick perovskite films. Here we demonstrate and elucidate an aerosol-liquid-solid process to enable continuous growth of uniform halide perovskite films at low temperature over a large area of 100 cm2, which are vertically monolithic, and thus beneficial to carrier transport. Direct-conversion X-ray detectors based on the representative CsPbI2Br films in conjunction with a deliberated, interface-engineered C-electrode have realized an unprecedented sensitivity (≥1.48 × 105 μC Gyair−1 cm−2) and a low limit of detection (280 nGyair s−1). We have further demonstrated the high-resolution radiographic imaging capability of these films. These results lay the groundwork for large-scale application of halide perovskites in radiation detectors.