Journal of Applied Polymer Science · 2021 · 23 citations · 42 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsDielectric MaterialsDielectric PropertiesDielectricsNanocompositesPolymer CharacterizationBarium TitanateComposite DielectricsDielectric CharacterizationDielectric PermittivityPermittivityPolymer DielectricsPolymer MatricesThermal Stability
Abstract Composites of nano‐sized barium titanate (BaTiO 3 ) with volume fractions up to 0.5 and poly(butylene terephthalate) (PBT) or linear low‐density polyethylene (LLDPE) were made via extrusion. Scanning electron microscopy demonstrated that BaTiO 3 is well dispersed in the polymer matrices. The crystalline content (DSC) and thermal stability (TGA) of both polymers decreased with increasing BaTiO 3 loading. Dielectric properties of the composites were measured using a vector network analyzer. Both dielectric permittivity and tangent loss increased with increasing BaTiO 3 content. At 2.45 GHz, the dielectric permittivity for 48 vol% BaTiO 3 ‐filled LLDPE and 43 vol% BaTiO 3 ‐filled PBT was 25 and 21.2, respectively. There was a good fit between the Lichtenecker model and experimental data obtained up to a certain value, with the permittivity variations being dependent on volume fraction. The improved dielectric performance achieved on inclusion of BaTiO 3 confirms both composite systems as potential candidates for microwave frequency capacitor applications.
42
High-dielectric-constant ceramic-powder polymer composites
Z.‐Y. Cheng, Vineet Bharti, Hongyao Xu et al. · Applied Physics Letters · 2000 · 737 citations
Natural Sciences, Materials Engineering, Materials Science +17
Bingcheng Luo, Xiaohui Wang, Yueping Wang et al. · Journal of Materials Chemistry A · 2013 · 439 citations
Natural Sciences, Materials Engineering, Materials Science +17