Polymers · 2021 · 24 citations · 56 references
Natural SciencesBioengineeringBiomedical EngineeringBiomaterialsPolymer ChemistryPolymer EngineeringAntimicrobial BiomaterialsBacterial BiofilmsBiofilm FormationBiofilm Formation In InfectionMicrobial BiofilmsPolymer SurfacesAdhesion PropertiesAntibacterial MaterialsAntimicrobial PolymersBiofilm Prevention StrategiesInitial Bacterial AdhesionPlasma TreatmentSlippery Liquid-infused Porous SurfacesSurface Properties
Many polymer materials have found a wide variety of applications in biomedical industries due to their excellent mechanical properties. However, the infections associated with the biofilm formation represent serious problems resulting from the initial bacterial attachment on the polymeric surface. The development of novel slippery liquid-infused porous surfaces (SLIPSs) represents promising method for the biofilm formation prevention. These surfaces are characterized by specific microstructural roughness able to hold lubricants inside. The lubricants create a slippery layer for the repellence of various liquids, such as water and blood. In this study, effective antimicrobial modifications of polyethylene (PE) and polyurethane (PU), as commonly used medical polymers, were investigated. For this purpose, low-temperature plasma treatment was used initially for activation of the polymeric surface, thereby enhancing surface and adhesion properties. Subsequently, preparation of porous microstructures was achieved by electrospinning technique using polydimethylsiloxane (PDMS) in combination with polyamide (PA). Finally, natural black seed oil (BSO) infiltrated the produced fiber mats acting as a lubricating layer. The optimized fiber mats’ production was achieved using PDMS/PA mixture at ratio 1:1:20 (g/g/mL) using isopropyl alcohol as solvent. The surface properties of produced slippery surfaces were analyzed by various microscopic and optics techniques to obtain information about wettability, sliding behavior and surface morphology/topography. The modified PE and PU substrates demonstrated slippery behavior of an impinged water droplet at a small tilting angle. Moreover, the antimicrobial effects of the produced SLIPs using black seed oil were proven against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli).
56
W. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 26.6K citations
Natural Sciences, Materials Engineering, Materials Science +16
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Tak‐Sing Wong, Sung Hoon Kang, Sindy K. Y. Tang et al. · Nature · 2011 · 4.1K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14
Continuous directional water transport on the peristome surface of Nepenthes alata
Huawei Chen, Pengfei Zhang, Liwen Zhang et al. · Nature · 2016 · 1.2K citations
Pseudomonas Aeruginosa: Resistance to the Max
Keith Poole · Frontiers in Microbiology · 2011 · 947 citations · Full text
Condensation on slippery asymmetric bumps
Kyoo-Chul Park, Philseok Kim, Alison Grinthal et al. · Nature · 2016 · 874 citations · Full text
Natural Sciences, Mechanical Engineering, Condensed Matter Physics +7