Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation

Abstract

The effects of T4, T5, and T6 treatment on the microstructure and mechanical properties of the extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr (wt.%) alloy with a relatively low RE content (7.5 wt.%) were investigated. T4 treatment at 450–500 °C induces a gradual grain growth of α-Mg but an obvious transition of texture component from <0001>⊥ED to <0001>∥ED. Interdendritic LPSO phases are highly stable against annealing while intragranular ones experience dissolution and re-precipitation. After peak-ageing at 200 °C, the elongation of as-extruded and T4 samples is just slightly reduced or even increased due to the weak ageing hardening response. T5 sample exhibits an attractive combination of strength and ductility, with a tensile yield strength (TYS) of 303 MPa and elongation of 20.0%. The Hall–Petch relation for the alloys with or without ageing treatment has been estimated. Grain boundary strengthening rather than precipitation strengthening has the dominant contribution to TYS, and a modified equation is developed to predict grain boundary strengthening values for Mg-Gd-Y-Zn-Zr alloys which contain different Schmid factors for basal slip.