Accelerated Laboratory Testing for Alkali-Silica Reaction Using ASTM 1293 and Comparison with ASTM 1260

Cruz Carlos, Maurício Mancio, Kome Shomglin, John Harvey, Paulo J.M. Monteiro, Abdikarim Ali

2004 · 11 citations · 1 references

Concepts

Abstract

The objectives of the study described in this report are: 1. Perform ASTM C 1293 laboratory tests on the same aggregates subjected to ASTM C 1260 testing. Compare the results of ASTM C 1260 and ASTM C 1293 and identify similarities and differences between the two tests for the same set of materials. 14 2. Perform a microstructural study for the reactivity of quartz grains on samples subjected to the two tests to identify any similarities and differences in the effects of the different test conditions. Use these results to help to determine whether the reactions are similar but just occur at different rates, or whether the reactions are different for the two tests. Two aggregates, one reactive and the other non-reactive, were used to perform this part of the study. 3. Investigate whether common California cement can be used with the addition of sodium hydroxide to perform ASTM C 1293 as an alternative to importing the expensive high-alkali content cement from Pennsylvania.

References

1