The Journal of Advanced Prosthodontics · 2020 · 38 citations · 31 references
DentistryDental Biomaterials ScienceDental Materials ScienceDental MaterialsMechanical Properties Of Dental MaterialsProsthodontic MaterialsAcrylic Resin MaterialsArtificial Teeth MaterialsDental CompositesDental PolymersDenture Base MaterialsDenture Teeth MaterialsArtificial Tooth Bonding To Acrylic ResinBond Strength To Denture TeethBonding Of Denture TeethCad And Cam Dental MaterialsCad Denture MaterialsDental Resin CementsDenture FlaskingResin-based Dental Materials
PURPOSE: The bond strengths between resin denture teeth with various compositions and denture base resins including conventional and AD/CAM purposed materials were evaluated to find influence of each material. MATERIALS AND METHODS: Cylindrical rods (6.0 mm diameter × 8.0 mm length) prepared from pre-polymerized CAD/CAM denture base resin blocks (PMMA Block-pink; Huge Dental Material, Vipi Block-Pink; Vipi Industria) were bonded to the basal surface of resin teeth from three different companies (VITA MFT®; VITA Zahnfabrik, Endura Posterio®; SHOFU Dental, Duracross Physio®; Nissin Dental Products Inc.) using resin cement (Super-Bond C&B; SUN MEDICAL). As a control group, rods from a conventional heat-polymerizing denture base resin (Vertex™ Rapid Simplified; Vertex-Dental B.V. Co.) were attached to the resin teeth using the conventional flasking and curing method. Furthermore, the effect of air abrasion was studied with the highly cross-linked resin teeth (VITA MFT®) groups. The shear bond strengths were measured, and then the fractured surfaces were examined to analyze the mode of failure. RESULTS: The shear bond strengths of the conventional heat-polymerizing PMMA denture resin group and the CAD/CAM denture base resin groups were similar. Air abrasion to VITA MFT® did not improve shear bond strengths. Interfacial failure was the dominant cause of failure for all specimens. CONCLUSION: Shear bond strengths of CAD/CAM denture base materials and resin denture teeth using resin cement are comparable to those of conventional methods.
31
Ulpee Darbar, R Huggett, A Harrison · BDJ · 1994 · 372 citations
Mathew T. Kattadiyil, Rami Jekki, Charles J. Goodacre et al. · Journal of Prosthetic Dentistry · 2015 · 276 citations