Low Cost Sensor With IoT LoRaWAN Connectivity and Machine Learning-Based Calibration for Air Pollution Monitoring

Abstract

Air pollution poses significant risk to environment and health. Air quality monitoring stations are often confined to a small number of locations due to the high cost of the monitoring equipment. They provide a low fidelity picture of the air quality in the city; local variations are overlooked. However, recent developments in low-cost sensor technology and wireless communication systems like Internet of Things (IoT) provide an opportunity to use arrayed sensor networks to measure air pollution, in real time, at a large number of locations. This article reports the development of a novel low-cost sensor node that utilizes cost-effective electrochemical sensors to measure carbon monoxide (CO) and nitrogen dioxide (NO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> ) concentrations and an infrared sensor to measure particulate matter (PM) levels. The node can be powered by either solar-recharged battery or mains supply. It is capable of long-range, low power communication over public or private long-range wide area network (LoRaWAN) IoT network and short-range high data rate communication over Wi-Fi. The developed sensor nodes were co-located with an accurate reference CO sensor for field calibration. The low-cost sensors' data, with offset and gain calibration, show good correlation with the data collected from the reference sensor. Multiple linear regression (MLR)-based temperature and humidity correction results in mean absolute percentage error (MAPE) of 48.71% and R <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of 0.607 relative to the reference sensor's data. Artificial neural network (ANN)-based calibration shows the potential for significant further improvement with MAPE of 38.89% and R <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of 0.78 for leave-one-out cross-validation.