Corrosion Science · 2020 · 72 citations · 26 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceMetallurgyThermodynamicsAlloysCorrosion EvaluationCorrosion MechanismsCorrosion ResistanceCorrosion TestingCorrosion-resistant MaterialsCorrosion DamageCorrosion Damage AssessmentCorrosion Resistance MaterialsCorrosion-resistance MechanismsGeothermal CorrosionGeothermal HeatingHigh-entropy AlloysHigh-temperature Corrosion Testing
• CoCrNiFeMo not prone to corrosionand thus shows potential for application in a high-temperature geothermal environment. • Thick Cu 2 S corrosion film observed for CoCrNiFeMoCu high-entropy alloys in the testing environment. • Complex oxide layer observed under outer Cu 2 S corrosion film on CoCrNiFeMoCu bulk alloy. • Cu rich intermetallics prone to corrosion between Mo rich and Ni-Fe rich phases in the CoCrNiFeMoCu high-entropy alloy. This article reports the morphology and corrosion study of CoCrNiFeMo and CoCrNiFeMoCu high-entropy alloys (HEA) tested in a simulated superheated geothermal environment to evaluate whether the alloys are candidate materials for a corrosive high-temperature geothermal environment. The HEA alloys with different alloying ratios were tested in superheated steam at 350 °C and 10 bar gauge containing HCl, H 2 S, and CO 2 with acidic condensate (pH = 3). The Cu containing CoCrNiFeMoCu alloys were prone to corrosion damage and corrosion rate was accelerated by intermetallic Cu rich sites but the CoCrNiFeMo alloys were not prone to corrosion in the test environment.
26
Microstructures and properties of high-entropy alloys
Yong Zhang, Ting Ting Zuo, Zhi Tang et al. · Progress in Materials Science · 2013 · 7K citations
Natural Sciences, Materials Engineering, Materials Science +12