Multifunctional Cathodic Interlayer with Polysulfide Immobilization Mechanism for High‐Performance Li‐S Batteries

Muhammad Waqas, Afaque Manzoor Soomro, Shamshad Ali, Suresh Kumar, Sattar Chan, Kashif Hussain, Fida Hussain Memon, Shoaib Ahmed Shaikh

ChemistrySelect · 2020 · 18 citations · 48 references

Concepts

Abstract

Abstract A highly efficient multifunctional polyvinylidene fluoride // carbon‐molybdenum disulfide (PVDF // C‐MoS 2 ) interlayer is developed by direct deposition on sulfur cathode through facile slide coating method for Li−S batteries. The as‐developed PVDF // C–MoS 2 interlayer exhibits the polysulfide adsorption and trapping capabilities, which reduces the shuttling effects and also slows down the self‐discharge in Li−S batteries. The first composite layer (C‐MoS 2 ) on the cathode maximizes the level of lithium polysulfide adsorption owing to the strong dipolar interaction of Mo−S on the polarized surface of polysulfide species. Moreover, the PVDF layer physically traps/capture the remaining polysulfide species with its interconnected microstructure for the reutilization as active material in the cathode. The Li−S batteries based on interlayers deliver the discharge capacity of 1086 mAh g −1 at 1 C with 3.0 mg cm −2 sulfur loading and show capacity decay of 0.04 % per cycle after 1500 cycles. In contrast, the Li−S batteries without interlayer merely maintain the discharge capacities of 423 mAh g −1 at 1 C with 3.0 mg cm −2 sulfur loading and show severe capacity decay ( 0.12 % ) after 505 cycles. The Li−S batteries also depict the remarkable cyclic performances with as‐developed interlayer for high sulfur loading cathodes and efficiently slowdowns the self‐discharge even after resting for a long time.

References

48