Applied Sciences · 2020 · 39 citations · 30 references
EngineeringMaterials EngineeringMaterials ScienceNanomaterialsSensorsThin FilmsPrinting TechniquesSensor MaterialsSoft SensorsStrain SensorsCarbon BlackCarbon NanocompositesFlexible ElectronicsFlexible Strain SensorsSensingStrain Sensor LinearityStrain Sensor MaterialsWearable Strain Sensors
Printing technology enables not only high-volume, multipurpose, low-impact, low-cost manufacturing, but also the introduction of flexible electronic devices, such as displays, actuators, and sensors, to a wide range of consumer markets. Consequently, in the past few decades, printed electronic products have attracted considerable interest. Although flexible printed electronic products are attracting increasing attention from the scientific and industrial communities, a systematic study on their sensing performance based on printability has not been reported so far. In this study, carbon black/Ag nanocomposites were utilized as pastes for a flexible wearable strain sensor. The effects of the rheological property of the pastes and the pattern dimensions of the printed electrodes on the sensor’s performance were investigated. Consequently, the printed sensor demonstrated a high gauge factor of 444.5 for an applied strain of 0.6% to 1.4% with a durability of 1000 cycles and a linearity of R2 = 0.9974. The sensor was also stable under tough environmental conditions.
30
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Sukang Bae, Hyeongkeun Kim, Youngbin Lee et al. · Nature Nanotechnology · 2010 · 8.1K citations · Full text
Natural Sciences, Materials Engineering, Materials Science +15
Frederik C. Krebs, Mikkel Jørgensen, Kion Norrman et al. · Solar Energy Materials and Solar Cells · 2009 · 801 citations
Natural Sciences, Materials Engineering, Materials Science +14
High-Performance Plastic Transistors Fabricated by Printing Techniques
Zhenan Bao, Yi Feng, Ananth Dodabalapur et al. · Chemistry of Materials · 1997 · 537 citations