Publication | Open Access
Controlled Grain Refinement of Biodegradable Zn-Mg Alloy: The Effect of Magnesium Alloying and Multi-Pass Hydrostatic Extrusion Preceded by Hot Extrusion
66
Citations
33
References
2020
Year
Materials ScienceEngineeringMagnesium AlloyingMechanical PropertiesGrain RefinementSevere Plastic DeformationMechanical EngineeringHydrostatic ExtrusionAlloy DesignSolid MechanicsNew Cardiovascular StentsHot ExtrusionConventional Hot ExtrusionMicrostructure-strength RelationshipPlasticityMetal FormingMechanics Of MaterialsMicrostructure
Abstract To satisfy the most stringent criteria in terms of new cardiovascular stents, pure Zn was alloyed with 1 wt pct of Mg and subsequently subjected to plastic deformation, using conventional hot extrusion followed by multi-pass hydrostatic extrusion. A detailed microstructural and textural characterization of the obtained materials was conducted, and mechanical properties were assessed at each pass of deformation process. In contrast to pure Zn, hydrostatically extruded low-alloyed Zn is characterized by a remarkable increase in strength and ductility (YS = 383 MPa, E = 23 pct), exceeding the values needed for stents. Such behavior is associated with a dual microstructure containing fine-grained Zn, alternatively arranged with bands of a fragmented eutectic. Extensive grain refinement was achieved due to the process of continuous dynamic recrystallization. Hydrostatic extrusion changes the initial $$ \langle 10\bar{1}0\rangle $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mo>⟨</mml:mo> <mml:mn>10</mml:mn> <mml:mover> <mml:mrow> <mml:mn>1</mml:mn> </mml:mrow> <mml:mrow> <mml:mo>¯</mml:mo> </mml:mrow> </mml:mover> <mml:mn>0</mml:mn> <mml:mo>⟩</mml:mo> </mml:mrow> </mml:math> fiber texture to a 〈0002〉 and $$ \langle 10\bar{1}1\rangle $$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mo>⟨</mml:mo> <mml:mn>10</mml:mn> <mml:mover> <mml:mrow> <mml:mn>1</mml:mn> </mml:mrow> <mml:mrow> <mml:mo>¯</mml:mo> </mml:mrow> </mml:mover> <mml:mn>1</mml:mn> <mml:mo>⟩</mml:mo> </mml:mrow> </mml:math> double fiber texture in which the 〈0002〉 component decreases with each pass of hydrostatic extrusion. The gradual evolution of texture components was simulated using a visco-plastic self-consistent model, which confirmed that, during hydrostatic extrusion, secondary slip systems were activated involving mostly the pyramidal one.
| Year | Citations | |
|---|---|---|
Page 1
Page 1