IEEE Transactions on Magnetics · 2020 · 52 citations · 35 references
Natural SciencesChemistryMaterials ScienceMagnetic MaterialsMaterials ChemistryNanomaterialsInorganic NanoparticlesMagnetic NanomaterialsMagnetic OxidesMagnetic Properties Of SolidsMetal Oxide NanomaterialsNanomaterial CharacterizationCation DistributionFerrite NanoparticlesFerritesMagnetic HyperthermiaSize-dependent Catalytic PropertiesSize-dependent Dielectric PropertiesSpecific Surface AreaSpinel Ferrites
Spinel ferrite nanoparticles are widely studied to evaluate their suitability in many applications. Magnetic, electrical, optical, and catalytic properties of spinel ferrites nanoparticles depend on: i) intrinsic property such as cation distribution among tetrahedral (A-site) and octahedral ligand (B-site) sublattices in spinel structure and ii) extrinsic properties such as specific surface area and particle size distribution of nanoparticles. To enhance the above properties by modifying both the intrinsic and extrinsic parameters, narrow size distributed Mg0.7Zn0.3Fe2O4 mixed spinel ferrite nanoparticles are synthesized by the solvothermal reflux method using high boiling point reflux solvents. The particles are crystallized in a cubic spinel structure and are single crystallites with an average particle diameter of 12 nm, measured from an electron micrograph. The temperature-dependent dielectric constant $(\varepsilon^{\prime})$ and dielectric loss $(\varepsilon^{\prime \prime})$ of the sample show no change below 290 °C and increase with temperature up to 450 °C. Both $\varepsilon^{\prime}$ and $\varepsilon^{\prime}$ decrease with the increase of electric field frequency and shows dominant space charge polarization at grain boundaries. The DC conductivity estimated from impedance spectra (Cole-Cole plot) shows the Arrhenius model electron hopping conductivity mechanism above 390 °C. Nanoparticles show high Ms (57.41 emu/g) than that synthesized by other methods. The sample shows the magnetic hyperthermia value of 189 W/g at 1 mg/mL concentration. The sample degraded 95% of rhodamine B dye in water in 320 min under UV light illumination. Some of these properties are superior to Mg0.7Zn0.3Fe2O4 nanoparticles synthesized by other wet chemical and/or ball milling methods.
35
Physical limits of hyperthermia using magnetite fine particles
R. Hergt, W. Andrä, C. G. D'ambly et al. · IEEE Transactions on Magnetics · 1998 · 652 citations
Xinyong Li, Yang Hou, Qidong Zhao et al. · Journal of Colloid and Interface Science · 2011 · 289 citations
Natural Sciences, Materials Engineering, Materials Science +17