AIP conference proceedings · 2020 · 46 citations · 15 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ProcessingPolymer ChemistryPolymer EngineeringPolymer CharacterizationPolymer Phase BehaviorPolymer PhysicsPolymer ProcessingThermogravimetric AnalysisThermoplastic PolymersAcrylonitrile Butadiene StyreneGlass TransitionGlass Transition TemperatureShrinkageTemperature Effects On ShrinkageThermal ContractionThermal PropertiesThermal Properties Of Printed Parts
This research aims to investigate the influence of bed temperatures on various acrylonitrile butadiene styrene copolymer (ABS) parts produced from Fused Deposition Modeling (FDM). The Printing process was conducted at a fixed nozzle temperature of 240°C while bed temperatures were varied from 90°C, 100°C and 110°C. Part shapes were varied accordingly to examine warpage, shrinkage and density due to variation of part thicknesses separately. Changes in the glass transition temperature of ABS printed parts with different bed temperatures were examined using Differential Scanning Calorimetry (DSC). It was found that the warpage and shrinkage reduced with increasing bed temperature due to the reduction of thermal stress with a higher glass transition temperature of printed samples compared with its filament. The thin sample indicated pronounced shrinkage compared with thick sample due to lower thermal contraction in the thicker sample but the former was less affected by the variation of bed temperature. Samples of different heights with fixed infill density indicated variations of the trend of density with different bed temperatures.
15
Measurements of the mechanical response of unidirectional 3D-printed PLA
Yichi Song, Y. Li, Wonsuh Song et al. · Materials & Design · 2017 · 614 citations
Natural Sciences, Materials Engineering, Materials Science +14
Claire Benwood, Andrew Anstey, Jacek Andrzejewski et al. · ACS Omega · 2018 · 259 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17