Polymers · 2020 · 17 citations · 35 references
EngineeringMaterials EngineeringMaterials SciencePolymer EngineeringPolymer MaterialsRheology3D PrintingPolymer AdhesionPolymer CharacterizationPolymer ProcessingPolymer RheologyPolymer StructureFused Filament FabricationMicrostructureMicrostructure-rheology RelationshipsPolymer Melt RheologyRheological BehaviorRheological CharacterizationShear Flow Of PolymersTensile Strain
New auto-plasticised copolymers of poly(vinyl chloride)-r-(acrylate) and polyvinylchloride, obtained by radical polymerization, are investigated to analyse their capacity to be processed by 3D printing. The specific microstructure of the copolymers gives rise to a phase-separated morphology constituted by poly(vinyl chloride) (PVC) domains dispersed in a continuous phase of acrylate-vinyl chloride copolymer. The analysis of the rheological results allows the suitability of these copolymers to be assessed for use in a screw-driven 3D printer, but not by the fused filament fabrication method. This is due to the high melt elasticity of the copolymers, caused by interfacial tension between phases. A relationship between the relaxation modulus of the copolymers and the interlayer adhesion is established. Under adequate 3D-printing conditions, flexible and ductile samples with good dimensional stability and cohesion are obtained, as is proven by scanning electron microscopy (SEM) and tensile stress-strain tests.
35
Polymer-Polymer Phase Behavior
Frank S. Bates · Science · 1991 · 1.4K citations
Natural Sciences, Materials Engineering, Materials Science +17
Mechanical characterization of 3D-printed polymers
John Ryan C. Dizon, Alejandro H. Espera, Qiyi Chen et al. · Additive manufacturing · 2017 · 1.3K citations
Natural Sciences, Materials Engineering, Materials Science +12