Case Studies in Construction Materials · 2020 · 157 citations · 20 references
EngineeringCivil EngineeringMaterials EngineeringBuilding MaterialsPavement EngineeringStructural MaterialsConcrete MaterialsFiber-reinforced CompositesMaterial PropertiesPavement ConstructionPavement DesignPavement MaterialsCompressive StrengthFiber Reinforcement EffectsFiber-reinforced Concrete PavementsFiber-reinforced MaterialsFibersFlexural StrengthHigh-strength ConcreteReinforced Concrete
The study examined how 1 % volume fractions of steel, glass, and polypropylene fibers affect the mechanical properties of normal‑strength and high‑strength concrete. Three fiber‑reinforced concretes were fabricated with 1 % hooked steel, glass, or polypropylene fibers, and their compressive, flexural, and residual strengths were measured to evaluate jointed plain concrete pavement thickness under identical traffic loading. Steel fibers markedly improved compressive and flexural strengths—doubling the gains of glass and polypropylene—and reduced pavement design thickness from 183 mm to 120 mm (normal) and 155 mm to 105 mm (high), yet cost‑benefit analysis shows glass and polypropylene fibers offer cheaper pavements for equivalent performance.
In this study, the effect of different fiber-reinforcements was investigated on the mechanical properties of normal strength and high strength concrete. Then using the mechanical properties of concrete, the design thickness of jointed plain concrete pavement was evaluated under the same traffic-loading conditions. For this purpose, three different fiber-reinforced concretes were produced using a 1% volume fraction of hooked steel fiber, polypropylene fiber, and glass fiber, respectively. Studied mechanical properties include compressive strength, flexural strength, and residual strength. The results of mechanical testing show that steel fiber is superior in enhancing the compressive and flexural strength compared to glass and polypropylene fiber. The net gain in flexural strength and residual strength due to steel fiber is almost twice compared to that caused by polypropylene and glass fiber. 1%steel fiber incorporation reduced the design thickness of pavement from 183 to 120 mm for normal strength concrete and 155 to 105 mm for high strength concrete. Owing to the best flexural performance, steel fibers were the most effective in reducing the design thickness in comparison with polypropylene and glass fibers. But cost to benefit ratio analysis suggests that steel fiber-reinforced concretes are not economical compared to glass fiber and polypropylene fiber-reinforced concretes for the same load-carrying capacity. Therefore, for the same performance, glass and polypropylene fiber-reinforced concretes can provide cheaper pavements than steel fiber-reinforced concrete and conventional plain concrete.
20
Vahid Afroughsabet, Luigi Biolzi, Togay Ozbakkaloglu · Composite Structures · 2017 · 284 citations · Full text